Since some computers are not provided with wireless network function, this reply is divided into "Connect computer to router via Wi-Fi" and "Connect computer to router via wired connection” to introduce installation process. Here is the installation step: 1)Double-click on the Auto run file and then select “I agree” in the agreement. 2)Select way 3: “Connect with wifi” and attention to the instructions display in the picture. 3)Please make sure that pc is connected with router via network cable or Wi-Fi 4) Please connect PC with printer via USB cable to configure printer Wi-Fi 5) After installation is finished, “Installation Complete” interface will pop out, you can select to “print test page” or “Done”.

Step1: Make sure printer is power on. Step2: Connect to Printer AP by mobile phone or PC. The SSID is start with” DIRECT-***”, and follow with number and character string. The default password is 12345678 Step3: Visit the Printer Web page via browser, Printer default address is 192.168.223.1 Step4： Enter the printer web page， choose “Log in” Tap. Step5: Input default user name: admin, Default password：000000. And Login. Step6： Select “settings” Tap wireless settings Wi-Fi Direct. Set the password in the tap, then click “apply “. Step7： Disconnect equipment and printer, when reconnect them, it should input the password as step 6 setting.

https://global.ggimage.com/printer/support.html

Since some computers are not provided with wireless network function, this reply is divided into "Connect computer to router via Wi-Fi" and "Connect computer to router via wired connection” to introduce installation process. Here is the installation step: 1)Double-click on the Auto run file and then select “I agree” in the agreement. 2)Select way 3: “Connect with wifi” and attention to the instructions display in the picture. 3)Please make sure that pc is connected with router via network cable or Wi-Fi 4) Please connect PC with printer via USB cable to configure printer Wi-Fi 5) After installation is finished, “Installation Complete” interface will pop out, you can select to “print test page” or “Done”.